Module for calibrating firmware of Continental SIM2K-24x control units for Kia/Hyundai petrol atmospheric and turbocharged cars.
Available for modification:
Air calculation: correction of measured MAF, maximum mass air flow, target mass air flow by torque
Turbocharging control: calculated turbocharging speed, maximum turbocharging pressure, minimum turbocharging pressure, pressure degree, throttle bypass working cycle, throttle bypass pressure.
Exhaust gas temperature model: base EGT, base/reference ignition advance for EGT model
Idle speed: nominal idle speed AT/MT, with air conditioning, without air conditioning
Detonation control: detonation sensor amplification
Rail pressure: target rail pressure, target rail pressure at startup, rail pressure during catalyst heating
Ignition advance: maximum ignition advance correction, minimum ignition advance, ignition advance during partial load, ignition advance at startup, ignition advance base, ignition advance retardation for torque correction, ignition advance angle efficiency
Target lambda: base lambda, target lambda at full load, target lambda during throttle opening
Throttle control: air mass flow through throttle body, maximum throttle position for AT/MT, reduced throttle body area for MT/AT
Torque model: required torque, coefficient for specified torque limit, specified torque, threshold value of required torque for full load mode
VVT: exhaust camshaft position, intake camshaft position
Injector control: dynamic injection timing map
Limiters: engine speed limit, vehicle speed limit (if available)
Error mask editor
To use the module, you need to purchase a USB protection key BitEdit. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, ONLY the serial number of the key and email are required.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference
