Kia/Hyundai Bosch ME(G)17.9.2x BitEdit module

Module for calibrating firmware of control units Bosch ME(G)17.9.21/22 and ME17.9.2 for atmospheric petrol vehicles Kia/Hyundai.

Available for modification:

Filling control: Air mass flow sensor pulsations, calculated filling
Temperature corrections for exhaust gas: Temperature-based ignition angle corrections, static exhaust gas temperature
Injection: Injection start angle during start, in normal mode, on a hot engine
Detonation control: Detonation sensor sensitivity, detonation regulation window, measurement window for detonation detection
Limiters: Engine speed limitation based on coolant temperature, intake air temperature, oil temperature
Ignition angle: Ignition angle characteristic for detonation correction, base angle delta and delta for blow-off protection, optimal ignition angle, base angle
Throttle control: Mass flow through the throttle, throttle opening angle, throttle position from pedal (direct law)
Torque model: Loss torque, optimal indicator torque, full load detection threshold, efficiency for ignition angle, mixture composition, maximum indicator torque in normal and sport modes, minimum efficiency
Torque request: Torque requests in all gears and modes, reverse pedal map for torque verification
VVT: Intake camshaft position during catalyst warm-up, base intake camshaft position and position on a hot engine
Warm-up: Warm-up corrections, combustion weight coefficient for both temperatures, warm-up correction for throttle
Error mask

To use the module, you need to purchase a BitEdit USB protection key BitEdit. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.

Updates of descriptions for new software versions within the module are free.

Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours). 

For module activation, ONLY the serial number of the key and email are required.