(G)17.9.8-100x100.webp)
(G)17.9.8-1000x1000.webp)
Module for calibrating firmware of Bosch ME(D)(G)17.9.8 control units for Kia/Hyundai petrol atmospheric and turbocharged vehicles.
Available for modification:
Fuel control: Air mass flow sensor pulsations, calculated fuel filling
Boost control: Compressor and turbine efficiency, isobaric heating process in the turbine
Temperature corrections for exhaust gas: Ignition timing corrections based on exhaust gas temperature, static exhaust gas temperature
Injection: Injection start angle during start, in normal mode, on a hot engine
Knock control: Knock sensor sensitivity, knock control window, measurement window for knock detection
Limiters: Engine speed limitation based on coolant temperature, intake air temperature, oil temperature
Rail pressure: Expected rail pressure under full and partial loads, pressure limitation and maximum pressure value
Ignition timing: Ignition angle characteristic for knock correction, base angle delta and delta for blow-off protection, optimal ignition timing angle, base angle
Throttle control: Mass flow through the throttle, throttle opening angle, throttle position from the pedal (direct law)
Torque model: Loss torque, optimal indicator torque, full load detection threshold, efficiency for ignition angle, fuel mixture, maximum indicator torque in normal and sport modes, minimum efficiency
Torque request: Torque requests in all gears and modes, reverse pedal map for torque verification
VVT: Intake camshaft position during catalyst warm-up, base intake camshaft position and position on a hot engine
Warm-up: Warm-up corrections, combustion weight coefficient for both temperatures, warm-up correction for throttle
Error mask
To use the module, you need to purchase a USB protection key BitEdit. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
