Module for editing calibrations of Honda cars with turbocharged petrol engines with a volume of 1.5 liters and Keihin control units.
Available for modification:
Air and boost calculation: intake system efficiency, boost pressure threshold for bypass valve operation, bypass valve operation, EGT boost limit, load limit, maximum boost at atmospheric pressure, maximum boost at intake temperature, maximum boost level, desired boost pressure, exhaust backpressure after the catalyst
Camshaft control: intake camshaft position, exhaust camshaft position under partial and full load
EGT: calculated EGT
Idle control: desired idle speed, desired idle speed after start
Injector control: fuel injector opening time, injector scaling
Knock control: air charge limit for knock, ignition advance limit for knock, knock retardation
Limitations: engine speed limit, vehicle speed limit
Mode switches: MAF threshold for full load entry, MAP threshold for full load entry, throttle position for full load entry (available maps depend on software)
Speed limit cut: MAP cut enable/disable on speed limit cut, injector cut enable/disable on speed limit cut
Sensor scaling: mass air flow sensor scaling, lambda scaling
Ignition advance: minimum ignition advance, ignition advance based on EGR, ignition advance retardation, ignition advance correction based on EGR, ignition advance correction using ECT and IAT, ignition advance correction based on camshaft angle
Target lambda value: maximum torque on lean mixture, target lambda value at full load, target lambda value in closed loop
Throttle control: airflow through throttle body, actuator force, throttle position alignment, throttle position limit, throttle position request, base torque, torque limit for automatic transmission
DTC error mask is not available, a pair of useful switches can be added upon request: Underboost error switch, Rear O2 sensor switch
Due to high load and a large number of requests, URGENT requests are not possible in the module. Requests for description updates for new software versions may take several days to process.
A USB protection key BitEdit is required to use the module. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Description updates for new software versions within the module are free.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required to activate the module.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
