Ford Bosch MG1/MD1 Gen2 Module for BitBox
FIDs: 513, 514, 515, 516, 517, 518, 519, 520, 524, 526
The BitBox Ford Bosch MG1/MD1 Gen2 module is designed for professional chip tuning workshops and service centers working with Ford vehicles. It supports both BENCH (on-table) and OBD modes, including reading and writing of protected Bosch MG1/MD1 Gen2 ECUs (2020+).
To activate the module you need a USB key BitBox/BitEdit. When ordering, please indicate the Serial Number of the key.
Main Functions of the Module
- Software version identification (SW ID)
- Reading of SOFT + CAL areas
- Writing of SOFT + CAL areas
- CS verification and correction
- Reading and clearing of DTC errors via OBD
BENCH Mode (on-table)
BENCH mode provides fast and stable performance. Available only with the Scanmatik 3 adapter.
Supported ECUs:
- Ford Bosch MD1CP061 TC298 8MB BENCH [SM3 ONLY] (FID: 524)
- Ford Bosch MD1CS025 TC387 10MB BENCH [SM3 ONLY] (FID: 516)
- Ford Bosch MD1CS027 TC387 10MB BENCH [SM3 ONLY] (FID: 532)
- Ford Bosch MG1CS036 TC399 16MB BENCH [SM3 ONLY] (FID: 513)
- Ford Bosch MG1CS040 TC399 16MB BENCH [SM3 ONLY] (FID: 514)
- Ford Bosch MG1CS055 TC389 10MB BENCH [SM3 ONLY] (FID: 528)
- Ford Bosch MG1CS060 TC387 10MB BENCH [SM3 ONLY] (FID: 515)
BENCH mode is essential for ECU recovery after interrupted flashing or when working with protected units.
OBD Mode (via diagnostic connector)
In OBD mode, the module works with any high-quality J2534 adapter.
⚠️ Important: this mode is very sensitive to voltage drops. To ensure safe flashing, a high-quality power supply or charger is required. If the process is interrupted, use BENCH mode with Scanmatik 3 for ECU recovery.
Supported ECUs:
- Ford Bosch MD1CP061 TC298 8MB OBD (FID: 526)
- Ford Bosch MD1CS025 TC387 10MB OBD (FID: 520)
- Ford Bosch MD1CS027 TC387 10MB OBD (FID: 533)
- Ford Bosch MG1CS036 TC399 16MB OBD (FID: 517)
- Ford Bosch MG1CS040 TC399 16MB OBD (FID: 518)
- Ford Bosch MG1CS055 TC389 10MB OBD (FID: 529)
- Ford Bosch MG1CS060 TC387 10MB OBD (FID: 519)
- Ford Bosch VD1CP110 TC375 6MB OBD/BENCH (FID: 536)
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference