![Combiloader М11/VS8 [057] module](https://iobd.io/image/cache/wp/gp/products/Combiloader/57-100x100.webp)
![Combiloader М11/VS8 [057] module](https://iobd.io/image/cache/wp/gp/products/Combiloader/57-1000x1000.webp)
Module Combiloader M11/VS8 is designed for reading/writing software of unprotected controllers Mikas-11 (Mikas-11, Mikas-11ET, Mikas-11CR) and VS-8, installed on Volga/GAZ/UAZ cars.
Note:
- Dorabotka is required for programming ECU of Mikas-11 type. For programming VS-8 ECU, no dorabotka is required.
- Version 1.4 or higher of the module is required for programming this type of ECU without dorabotka using adapter CombiLoader v3.
- Programming of ECU without dorabotka can be performed without removing it from the car by connecting through the diagnostic connector using an additional cable (purchased separately or using the diagnostic cable from the SMS-Diagnostics program kit), connected to adapter CombiLoader v3.
- The developers of ECU MIKAS-11 exclude the modification of ECU software (produced after the end of 2008), it is not recommended to use programming mode without dorabotka. Before working with the ECU, perform dorabotka and read the firmware. If you receive a firmware program buffer containing repeated data 9B 00 9B 00 9B 00..., do not attempt to reprogram it – this may lead to its failure.
To work with the module, it is necessary to purchase Loader Package v.3 You can buy the Loader in our store. An unlimited number of modules can be purchased for one Loader.
To activate the module, you need the serial number of the key, USB host, full name, and email address. Activation is done during working hours within 5-10 minutes, with a delay of up to 1-2 hours on weekends.
Open the program and click “Help” -> “About”
Double-clicking copies the data from the "Serial number" and "Dongle fields".
To order, you must also provide your full name and email address that you provided during registration.
After receiving the activation code, click "Help" and "Enter activation code".
Paste the received activation code.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.