![Combiloader HK Siemens SIM2K/MT38/MT86 [012] module set](https://iobd.io/image/cache/catalog/products/Combiloader/12-100x100.png)
![Combiloader HK Siemens SIM2K/MT38/MT86 [012] module set](https://iobd.io/image/cache/catalog/products/Combiloader/12-1000x1000.png)
Combiloader HK Siemens SIM2K/MT38/MT86 module set is designed for reading/writing Siemens SIM2K/MT38/MT86 ECUs installed on Hyundai/Kia vehicles without removing the control unit from the vehicle.
Supported ECUs and vehicles:
- Siemens SIM2K C201/240/241/242/245 ECU is installed on Hyundai, Kia, SsangYong vehicles.
The module allows reading/writing FLASH memory using diagnostic method without removing the ECU from the vehicle, it works through J2534 interface.
- Siemens SIM2K 140/141/141.1/142/143/341/D160 ECU is installed on Kia (Magentis, Cerato, Carens, Sorento, Sportage), Hyundai (Sonata, IX35) vehicles with engines of 2.0L and above, as well as Chevrolet Epica.
The module allows reading/writing program or calibration areas using diagnostic method without removing the ECU from the vehicle.
The set includes two versions of the module:
- Module that works through the loader adapter, using K-line for communication with the ECU
- Module that works through J2534 interface, using K-line or CAN bus for communication with the ECU
- Delphi MT38 ECU is used on Kia (Carnival, Mohave, Opirus, Magentis, Sorento), Hyundai (Genesis, Grandeur, Santa Fe, Sonata, IX55) vehicles with V6 2.7/3.3/3.8L engines.
The module allows reading (only K-Line ECUs) and writing flash memory using diagnostic method without removing the ECU from the vehicle. To read the firmware from CAN ECUs, use BSL TC17xx J2534 module.
The set includes two versions of the module:
- Module that works through the loader adapter, using K-line for communication with the ECU
- Module that works through J2534 interface, using K-line or CAN bus for communication with the ECU
- Delphi MT86 ECU is installed on Kia (Cadenza, Quoris), Hyundai (Genesis, Equus) vehicles with V6 3.3/3.8/5.0L engines.
The module allows reading calibrations and writing program/calibrations using diagnostic method without removing the ECU from the vehicle. To read the full firmware from the ECU, use BSL TC17xx J2534 module, it works through J2534 interface.
To use the module, you need to purchase Loader Package v.3 You can buy the loader in our store. You can purchase an unlimited number of modules for one loader.
To activate the module, you need: serial number of the key, USB host, full name, and email address. Activation is done during working hours within 5-10 minutes, on weekends with a delay of up to 1-2 hours.
-
There are no reviews for this product.
-
No questions yet
Open the program and click “Help” -> “About”
Double-clicking copies the data from the "Serial number" and "Dongle fields".
To order, you must also provide your full name and email address that you provided during registration.
After receiving the activation code, click "Help" and "Enter activation code".
Paste the received activation code.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.