Module Combiloader Bosch M(E)7.9.7 is designed for flashing the FLASH memory of Bosch ECUs installed in vehicles of Korean, Chinese, and domestic production.
Supports working with Bosch ECUs MSE3.0, M7.9.7, ME7.9.7, M7.9.71(M7.9.7+), M7.8, ME7.8.8, via the loader adapter and via the J2534 adapter.
The module allows flashing firmware using diagnostic methods, without removing the ECU from the vehicle, through the diagnostic connector (for working with ECUs on VAZ vehicles, direct connection to the ECU connector is required, no disassembly of the unit is necessary).
The module exists in two versions:
- Operating through the Loader adapter, using the K-line for communication with the ECU
- Operating through the J2534 interface, using the K-line or CAN bus for communication with the ECU. In this case, the K-line must be connected to the J2534 adapter
To work with the module, it is necessary to purchase a Loader Package v.3 The loader package can be purchased in our store. An unlimited number of modules can be purchased for one loader.
To activate the module, you need: the serial number of the key, USB host, full name, and email address. Activation is performed during working hours within 5-10 minutes, with a delay of up to 1-2 hours on weekends.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
Tags: combiloader