Module for calibrating firmware of control units Bosch ME17.8.8 and Bosch ME17.8.8.1 for Chinese-made petrol atmospheric and turbocharged vehicles.
Available for modification:
Mass Airflow Control: mass flow through the throttle, throttle position, accelerator pedal map
Boost: boost control valve request, linearization, P-component, control basis, boost limiters
Exhaust Gas Temperature
XX: desired XX RPM for automatic/manual transmission, desired RPM with air conditioning, minimum XX RPM
Detonation Control: detonation sensor sensitivity per cylinder, angle rollback step, angle recovery
Limits: engine RPM limit
Ignition Timing: base ignition timing, minimum angle, optimal angle, composition-based angle correction
Mode Switching: torque request threshold for full load mode transition, throttle position for full load mode transition
Mixture Composition: desired composition at partial loads, during acceleration, during warm-up, delay during acceleration mode transition
Torque Limitation: torque limitation for monitoring, tolerance offset for allowed torque, maximum torque
Torque Model: driver torque request, optimal indicator torque, specified torque fill, angle efficiency, composition efficiency, indicator torque limit, minimum efficiency
VVT: intake camshaft phase
Fan Control: coolant temperature for fan activation/deactivation
Injector Control: end of injection angle
Error Mask
To use the module, you need to purchase a BitEdit USB protection key BitEdit. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required to activate the module.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
