Universal software module for working with Bosch MG1/MD1 engine control units in BENCH mode.
Universal module for working on the bench with Bosch MG1/MD1 control units based on SPC and Aurix processors.
Attention! The module only works with J2534 devices Scanmatik SM2 and SM2 Pro. Also, to connect on the bench, an adapter with automatic power control (SM2 bench, BITS001, Powerbox, etc.) is required.
Bosch MG1/MD1 SPC/AURIX BENCH (FID: 282)
Allows reading and writing with automatic processor type and memory size detection. The work is carried out when the control unit is connected on the bench. Checksum correction is performed during writing.
Supported processors: AURIX TC275, TC277, TC298, TC299, SPC5777, SPC572.
Which vehicles and control units does the Bitbox Bosch MG1/MD1 BENCH module support:
|
BMW/Mini:
Mercedes:
Renault:
Kia/Hyundai:
Moto/Extreme:
GM:
|
Ford:
Suzuki:
China:
Mahindra/Tata/GAZ:
Trucks/Ind.:
|
VAG group:
PSA group:
JLR:
Volvo/Lynk&Co:
Vinfast:
|
If your control unit is not listed in the supported list, please contact the developer with complete information about the vehicle and control unit type. Adding new control unit types is possible remotely within 1 working day.
Attention! During testing, Bosch MG1/MD1 control units manufactured in the second half of 2020 were found, which have protection against "on the bench" operation. The units were found in BMW, KIA/Hyundai, BRP, and there is a high probability for other brands as well. It is impossible to work with such units using this module.
Scanmatik drivers need to be updated to version 2.21.11 or higher.
The module requires the purchase of aUSB dongle for protection. The dongle can be purchased from our store. An unlimited number of modules can be activated on one dongle.
Module activation takes place within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Module activation requires ONLY the dongle's serial number and email.
To work through the OBD2 connector, Scanmatik 2 PRO is required.
To connect the control unit on the bench, additional equipment needs to be purchased, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.