Hurry to buy Promotion ends left
-
Discounts for module payments:
- 2–3 modules — extra 5% discount (use coupon BIT25_15)
- 4+ modules — extra 10% discount (use coupon BIT25_20)
Module for calibrating firmware of Bosch MD1 control units for BMW diesel cars. Supports all necessary maps for tuning, EGR and DPF disable, as well as SCR (ADBlue)!
File size supported: 7.5 MB.
Available for modification:
Air mass control: expected air flow, flow correction
Turbo pressure: desired turbo pressure, turbo pressure limit, turbo pressure controller PWM and its limits
DPF: regeneration masks, DPF disable flags, differential pressure sensor calibration, error detection flags and voltages
EGR: EGR position correction, lower/upper thresholds for EGR activation in all modes, maximum EGR position
Exhaust gas temperature sensors: calibration of all exhaust gas temperature sensors, voltage error detection thresholds, flags
Injection: injector opening time, injection mass calculation from moment, post-injection, main injection start angle and its limit
Rail pressure: PID controller components, desired rail pressure, pressure limit, minimum pressure for starting, rail pressure regulator
SCR (Adblue): catalyst filling/regeneration, NOx flags, ADblue injection, lambda regulation, NSC, LamCtl
Mixture composition: mixture composition for smoke limitation
Torque limitation: main input and output torque limiters, torque limitation in case of errors, torque limitation based on exhaust gas temperature, fuel, and backpressure
Torque request: torque request, pedal calculation maps for ECO, Sport, Sport+ modes, requested torque reduction based on coolant temperature and atmospheric pressure
Error mask
To use the module, you need to purchase a BitEdit USB protection key . The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Description updates for new software versions within the module are free.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
For module activation, ONLY the serial number of the key and email are required.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
