VN003 is a world leader in key learning and is a great solution for key transponder, PCB, and remote-control programming for Volkswagen/Audi/Seat/Skoda/Bentley/Lamborghini and even some Porsche vehicles.
It works for vehicles produced from 1996 up to 2018.
Main functionalities:
- Key Programming by OBDII in ALL KEYS LOST situation, and when programming additional key.
- Dealer Key preparation
- Read/Update Immobiliser related data – PIN, Component Security , Power Class, MAC
- Read/Update IMMO data from ECU
- Standard and Wizard mode key programming (Guided functions)
Supported models:
VN003 covers a range of cars with the following immobiliser systems:
- IMMO I
- IMMO II
- IMMO III
- IMMO III+
- IMMO IV
- IMMO V (BCM2)
Immo I/II with external immobiliser box up to 2003
- Additional Key Programming and AKL by OBDII
- Audi A3/A4/A6
- VW Golf/Passat
- Others
*in some cases immo box needs to be read with a programmer
Immo III 2003 - 2007
- Additional Key Programming and AKL by OBDII
- Read/Update CS, and PIN by OBDII (from ECU and immobiliser/dashboard)
- Audi A8
- VW Phaethon/Touareg
- Bentley
- (all models with Kessy)
*ZN061 for VW Tauran/Golf 5 AKL
Immo III+ 2007 - 2014
- Additional Key Programming and AKL by OBDII
- Read/Update PIN and CS by OBDII
- Extracting 7th bite of CS
Audi A3/A8
VW Passat/Touareg,
Porsche Cayenne
Bentley
*ZN060 might be required for A3 in AKL
*TA31 might be required to extract 7th byte in AKL
Immo IV
- Additional Key Programming and AKL by OBDII
- Read/Update Immo data by OBDII
Audi A6 and Q7 (2006+), (EZS Kessy)
VW Golf VI, Jetta, Touaran, Tiguan, (VDO Nec, Micronas, Magnetti Marelli) Beetle, New Beetle
*AKL if ECU cannot be read by OBD or internal CAN, it needs to be done by dump
*ZN059 would be required in AKL situations for VDO Nec
Immo V (BCM2) 2008 - 2018
- All Keys Lost up to 2012 - 2013
- Additional key programming up to 2018
- Disable ELV
- Audi A4/A5/Q5/ 2008+
- Audi A6/A7/A8/VW Touareg (2010-2018)
Compatible keys:
MQB vehicles require VN009.
An AVDI interface with an active AMS in order to use this special function, ZN002 / ZN003 PROTAG Programmer required for using it.