Module for working with Continental Simos 12.X and Simos 18.X control units installed in VAG group cars.
Module for working with Continental Simos 12 and Simos 18 control units installed in VAG group cars.
Which cars and control units does the Bitbox VAG Continental Simos 12 / 18 module support:
FIDs: 401, 402, 403
VAG Continental Simos 12.X (FID: 401)
Supports Continental Simos 12.1 and Simos 12.2 control units.
These units are based on the TC1797 processor with internal 4Mb flash memory. Allows reading FullFlash and writing calibrations with checksum correction on the bench (BENCH-CAN). Does not require opening the unit. Works only with Scanmatik 2/2 Pro adapter. Requires a special adapter for bench connection with GPT support.
VAG Continental Simos 18.X (FID: 402)
Supports Continental Simos 18.1, 18.2, 18.6 control units. Simos 18.3 in test mode.
These units are based on the TC1791 processor with internal 4Mb flash memory. Allows reading FullFlash and writing calibrations with checksum correction in BSL mode. Requires opening the unit and soldering (see manual). Works only with Scanmatik 2/2 Pro adapter. Requires a special adapter for bench connection with GPT support.
VAG Continental Simos 18.10 (FID: 403)
These blocks are based on the TC1791 processor with internal flash memory of 4Mb. It allows reading FullFlash and writing calibrations with checksum correction in BSL mode. Requires opening the block and soldering (see manual). Works only with Scanmatik 2/2 Pro adapter. Requires a special adapter for connection on a table with GPT support.
To work with the module, the purchase of a USB protection key Bitbox is required. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required to activate the module.
To work through the OBD2 connector, a J2534 adapter is required (Scanmatik 2, OpenPort 2.0, Dialink, Mongoose, and others). More about J2534 here.
To connect the control unit on the table, the purchase of additional equipment is required, any of the following:
Powerbox and Combibox for PCMflash are fully compatible with Bitbox.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.