Software module for calibrating firmware of Denso newGen control units for Toyota diesel vehicles with engine capacity of 2.4 and 2.8 TD.
Module supports firmware files:
- MCU D76F0196F1 1536Kb
- MCU D76F0219F1 2048Kb
Available for modification:
Air and EGR control - Required air mass in additional mode, Correction additive for air mass, Target position of EGR valve in additional mode, EGR position correction, Maximum air mass flow rate
Turbocharger pressure: desired value - turbocharger pressure, maximum allowable turbocharger pressure (absolute), turbocharger pressure limiter
Turbocharger pressure: VNT - turbocharger pressure drive duty cycle, basic turbocharger pressure drive map, VNT drive
Driver request - Basic injection volume multiplier basis used for calculation of request, Acceleration correction of driver request multiplier, Injection volume multiplier based on requested torque and engine speed
Injection - main injection time, pilot injection time
Injection volume - Injection volume correction coefficient based on intake air temperature, Injection volume correction coefficient based on air mass flow rate, Maximum injection volume, Injection volume limit in case of system error, Maximum torque, Injection volume limit
Input sensors - intake air temperature sensor conversion curve, turbocharger air temperature sensor conversion curve, coolant temperature sensor conversion curve
Speed limiter - Vehicle speed limiter
Rail pressure - target rail pressure, target rail pressure in regeneration mode, rail pressure correction values, maximum rail pressure, rail pressure limiter, rail pressure
Injection start - Start of main injection in additional mode, Start of pilot injection in additional mode
Torque model - Requested torque, accelerator pedal map
Diagnostic trouble code mask
Supported vehicles for Toyota Denso Diesel 5 BitEdit module:
- Toyota HiLUX
- Toyota LC150 Prado
- Toyota Innova
- Toyota Fortuner
Supported engines for Toyota Denso Diesel 5 BitEdit module:
- 2.8TD 1GD-FTV
- 2.4TD 2GD-FTV
Module requires the purchase of USB protection key BitEdit. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Updates of descriptions for new software versions within the module are free.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
Only the serial number of the key and email are required for module activation.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.