-
From July 3 to July 17 (inclusive) the PCMflash developer will be on vacation. Activations will be delayed. Delays of up to a day are possible
- PCMflash Support
Activation of PCMflash 92 module - Bosch MD1/MG1 Bootloader
Module 92 "Bosch MD1/MG1 Bootloader" for PCMflash is a license for working with Bosch MD1 and MG1 ECUs in direct connection to the ECU connector. This module is designed for reading, writing, and servicing engine control units using SPC572L, SPC574K, SPC5777M, SPC58, TC275TP, TC277TP, TC298TP, TC299TP, TC387QP and TC399XP microcontrollers.
To activate the module you need a USB key PCMflash. When ordering, please indicate the Serial Number of the key.
Main functions of module 92 from PCMflash
- MD1/MG1 FLASH (SPC572L/SPC574K/SPC5777M/SPC58/TC275TP/TC277TP/TC298TP/TC299TP/TC387QP/TC399XP) [RD/WR/CK]
- MD1/MG1 EEPROM (SPC572L/SPC574K/SPC5777M/SPC58/TC275TP/TC277TP/TC298TP/TC299TP/TC387QP/TC399XP) [RD/WR]
- MG1UA008/MG1US008 FLASH (SPC574K/TC277TP) [RD/WR/CK]
- MG1UA008/MG1US008 EEPROM (SPC574K/TC277TP) [RD/WR/CK]
RD – Read, VR – Virtual Read (converter or stocks), WR – Write, CK – Check/Correction of Checksum, NC – No Checksum Used
The module enables direct bootloader access to Bosch MD1/MG1 ECUs, which is critical for chip tuning and software recovery. It supports ECUs with older security systems (manufactured before mid-2020). ECUs with the newer protection system are not supported.
A compatible adapter is required:
- Scanmatik 2 / Scanmatik 2 Pro / Scanmatik 3
- Dialink (partial compatibility).
Run the program and on the main screen it says "USB dongle serial number"
Launch the program and click “Settings”
Paste the code to activate the module and click “Activate”
After rebooting, the activated module should be displayed, highlighted in bold text.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.