GM ECU Sirius D3/D32/4R/42R/D42/D52.
Module supports working with ECU blocks SiriusD3/D32/4R/42R/D42/D52, which can be installed on GM vehicles.
Module has two modes for working with ECU data.
OBDII mode (diagnostic port connection), for professional Chip-Tuning:
- ECU Identification (OBDII mode)
- Reading base software and calibration area (OBDII mode)
- Writing calibration area (OBDII mode)
- Checksum recalculation
Bench mode tab (working on the table without disassembling ECU), for ECU cloning:
- Reading full Flash image (Full Flash)
- Writing full Flash image (Full Flash)
- Reading virtual EEPROM image
- Writing virtual EEPROM image
Not all software versions may be supported.
To use the module, you need to purchase a USB protection key. You can activate an unlimited number of modules with one key. To activate new modules, you need to provide the serial number of your key.
Open the program and click “Settings” -> “Number key”
Click “OK” and click ok and your key number will be copied.
After receiving the activation file, click "Update license in key" and open the module license file.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
