GM Siemens Simtec 76 ECU BENCH/OBDII.
The module allows working with Siemens Simtec 76 ECUs in both OBDII Mode and Bench Mode.
OBDII Mode (on-car operation):
- Identification
- Read/delete errors
- Read Flash
- Write calibration area (with checksum recalculation)
Bench Mode (bench operation):
This tab is used for ECU cloning.
- Read Flash
- Write Flash (without checksum recalculation)
- Read/write EEPROM
Not all software versions may be supported.
To use the module, you need to purchase USB security key. You can activate an unlimited number of modules with one key. To activate new modules, you need to provide the serial number of your key.
Open the program and click “Settings” -> “Number key”
Click “OK” and click ok and your key number will be copied.
After receiving the activation code, click "Enter lecense code" and paste the activation code into the field. After that, restart the program.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.
In stock
License 116. Toyota/Lexus RH850 DASH BENCH (MDflasher)
-50 %$45 $90
Hurry to buyPromotion ends left
In stock
License 22. Cypress/Fujitsu/Spansion MB91F0xx/S6J3xx MCU UART (MDflasher)
$119
In stock
License 28. Hyundai/Kia NEC34/NEC35/S6J3xx/R7F7xx DASH BENCH/OBDII (MDflasher)
$90