Module for calibrating firmware for Mazda petrol cars with Denso control units based on Renesas SH7055, SH7058 processors.
Available for modification:
Pneumatic load: engine load limitation, load correction for MAF
Configuration: engine displacement, delay time, air mass flow scaling.
EGR: target EGR position
Idle: Desired idle speed
Injection: target AFR in open loop, target AFR in closed loop, load thresholds for switching to open loop
Knock control: knock sensitivity, retardation limits and thresholds
Ignition advance: maximum advance, ignition advance at low and high loads, idle ignition advance, ignition advance correction
Torque model: required torque
VVT: intake camshaft position
Limiters: engine speed limiters, vehicle speed limiters
DTC mask editor
The module requires the purchase of a USB protection key BitEdit. The key can be purchased in our store. An unlimited number of modules can be purchased for one key.
Description updates for new software versions within the module are free.
Module activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
ONLY the serial number of the key and email are required to activate the module.
-
There are no reviews for this product.
-
No questions yet
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.