License 133 GAZ Mikas M74.9 for MDflasher: BENCH and OBDII Support
License 133 is designed to work with Mikas M74.9 ECUs (259.3765 004-11) installed in GAZ vehicles using ITELMA firmware, based on Artery AT32F4xx microcontrollers (ARM architecture). This license enables connection via OBDII port or directly through CAN-bus (BENCH), providing full access for ECU repair and recovery operations.
To use the module, you need to purchase a USB protection key. You can activate an unlimited number of modules with one key. To activate new modules, you need to provide the serial number of your key.
Supported functions:
- ECU Identification Readout
- Read and Clear DTCs (Diagnostic Trouble Codes)
- Full Flash Read
- Full Flash Write
- EEPROM Read/Write
- ECU Reset
Important notes:
- Not all software versions may be supported
- Recommended Adapter: Scanmatik (for stable communication)
- Internet Connection: Required for operation
Open the program and click “Settings” -> “Number key”
Click “OK” and click ok and your key number will be copied.
After receiving the activation code, click "Enter lecense code" and paste the activation code into the field. After that, restart the program.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.