![ChipTuningPRO HK Bosch ME17.9.11/12/13 [065] module](image/cache/wp/gp/products/Chip/65-100x100.webp)
![ChipTuningPRO HK Bosch ME17.9.11/12/13 [065] module](image/cache/wp/gp/products/Chip/65-1000x1000.webp)
Module ChipTuningPRO HK Bosch ME17.9.11/12/13 allows chip tuning of Hyundai and Kia vehicles equipped with Bosch ME17.9.11/12/13 ECU.
Over 400 calibrations are available for editing. The module calculates checksums when saving the firmware.
All the most important calibrations are available for modification: starting parameters, idle speed, fuel cutoff during deceleration, ignition timing and its corrections in all modes, fuel delivery with dynamic corrections, injection timing, torque model calibrations, VVT system calibrations, generator control system (AMS) calibrations, error masks, sensor calibrations, and much more.
Please note:
- By default, firmware for Bosch ME17 controllers is saved in SMS-Soft Container File format. To load such firmware, only CombiLoader loader should be used.
- Saving in the regular BIN format is also possible.
- Writing firmware with modified calibrations using diagnostic method is possible with the help of Bosch MEDC17 module and CombiLoader loader.
- To protect your firmware from being read, use the functionality extension add-on.
- To save the original CVN, use the functionality extension add-on.
To use the module, you need to purchase a ChipTuningPro USB protection key. The key can be purchased in our store. You can purchase an unlimited number of modules for one key.
Updates of descriptions for new software versions within the module are free of charge.
Module activation is done within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate the module, you need to send a request for module activation, full name, and email.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.