![VM35B292_DBL / VM35B292_3MODE [174] firmware](image/cache/wp/gp/products/Chip/174-100x100.webp)
![VM35B292_DBL / VM35B292_3MODE [174] firmware](image/cache/wp/gp/products/Chip/174-1000x1000.webp)
Set of two-mode and three-mode firmware versions VM35B292_DBL / VM35B292_3MODE for UAZ "Patriot" or UAZ "Hunter" with electronic gas pedal.
Recording in the ECU with serial software VM35B292 (DAD, Euro-4).
Switching between full sets of calibrations is supported, including identifiers and error masks, disabling the fuel pump and lambda regulation with special flags, as well as disabling injectors and lambda regulation using standard calibrations.
Two-mode switching options:
- Through the DTV channel with low or high level, through the DK2 channel with low or high level
Three-mode switching options:
- Through the DK2 channel with low/high level
Calibrations of this firmware will not be visible in ChipTuningPRO if opened with a standard map.
The kit includes: two-mode and three-mode firmware (uncalibrated), documentation, and a license for editing in ChipTuningPRO 7.
This license only works with a license for the module Bosch ME17.9.7 VAZ/UAZ.
To write the firmware, you need the module ME17.9.7 or the module BSL Tricore TC17xx for the CombiLoader.
To work, the purchase of a ChipTuningPro USB protection key is required. The key can be purchased in our store. One key can be used to purchase an unlimited number of modules.
Activation is performed within 1 hour on business days (usually 10-15 minutes). Activation may be delayed on weekends and holidays (up to 2 hours).
To activate, you need to send a request for module activation, full name, and email.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference