License ST012 (Fujitsu/Spansion) STool for reading/writing mileage, EEPROM and Flash in car instrument panels via Denso adapter using programming points.
Supported cars and instrument panels:
- Daihatsu (Denso adapter)*
- Honda (Denso adapter)*
- Hyundai (Denso adapter)*
- Kia (Denso adapter)*
- Lexus (Denso adapter)*
- Suzuki (Denso adapter)*
- Toyota (Denso adapter)*
* Disassembly of the instrument panel is required, work inside the chip using points near the processor, not through the rear panel connector!
To work with the module, the purchase of USB protection key is required. One key can activate an unlimited number of licenses. To activate new licenses, you need to provide the serial number of your key.
Launch the program and click the “About” button in the lower left corner.
Copy the “Guardant dongle” and and indicate this number in the order.
The CAN-FD adapter number can be seen on the sticker on the adapter or in the program, click on the "CAN FD adapter" section and test the device.
After activation you will receive the file “License.da4” (the file name must be exactly License.da4). Save this to the main folder with the program. if you have an old license file, delete it.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
After status update to "Waiting for activation", the data has already been sent to the developer for activation. The order cannot be canceled or corrected starting from this status update.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.