The module supports virtual reading, firmware writing, error reading/deleting, checksum verification/correction (bypassing digital signature) on BMW/Mini vehicles with Bosch MED17/EDC17 ECU.
Minimum requirements for this module are an i3 processor - 2.5GHz and 4GB of memory.
Tabs:
- CAN - for Master ECU
- Slave - For writing to the second motor ECU (Slave)
- Stock - to return to stock without using a patch, so that the native CVN was present for both the master and slave ECUs
- Repair - For non-standard situations, for both the master and slave ECUs
What functions does the MMC FLASH module support:
- Calibration writing
- Identification
- Error reading/deleting
- Virtual reading
- Checksum recalculation
To use the module, you need a MMC Flash USB key and a J2534 adapter.
To activate the module, only the serial number of the key is required.
-
There are no reviews for this product.
-
No questions yet
Open the MMC flasher program, the key serial number is indicated in the lower right corner.
After activating the module you will receive an updated program, install the program
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.