Infineon XC2xxx, C167, ST10 ECU BSL.
Module set for working with various ECUs in BSL mode on the table, on the Infineon XC2xxx, C167, ST10 microcontroller families. They can be found in engine ECUs of various car manufacturers.
Approximate list of ECUs:
- XC2060, XC2765, XC2768
- M74, M86
- ST10: Mikas 11.CR/VS8, Mikas 11ET/TM, Yanvar 7.2+, M73(Itelma)/M74K, Bosch Kefico M(G)7.9.8
- C167: Siemens Simos 3.x, Siemens Simos 7.1, Siemens Simos 9.1, Sirius D3 / 4R, Sirius D32 / D42 / 42R / D52, Simtec 71.6(GM), Simtec 75(GM), Simtec 76(GM), EMS3132, EMS3134, SIMK41/SIMK42/SIMK43 29F200BB, SIMK42/SIMK43/SIM2K47 29F400BB
Supported functions:
- Read FLASH MK*
- Write FLASH MK*
* - engine ECU management program if it is located in external FLASH memory, the module reads and writes to the external FLASH memory.
Not all software versions may be supported.
To use the module, the purchase of a USB protection key is required. One key can activate an unlimited number of modules. To activate new modules, you need to provide the serial number of your key.
-
There are no reviews for this product.
-
No questions yet
Open the program and click “Settings” -> “Number key”
Click “OK” and click ok and your key number will be copied.
After receiving the activation file, click "Update license in key" and open the module license file.
An activated module or license cannot be returned.
If you have entered the wrong key or device number, the return is not valid. It is not possible to modify the license for another device.
Pay attention to all information specified in the description of modules and scripts taken from the manufacturer. We are not responsible if the information is not correct or there are some differences from the reality. In the disputed situation, it is necessary to look for a solution to the issue to the manufacturer.
Our store is not responsible for the functionality of the software module. We cannot guarantee the declared functions since we are not the developer.