Hurry to buy Promotion ends left
$89.60
$179.20
savings $89.60
* +4% Order Processing Fee applies. No extra payment service fees.
Dacia/Lada/Nissan/Renault Bosch ABS/ESP BENCH/OBDII.
The module works through the OBDII connector via the CAN bus with ABS/ESP BOSCH 9.0-9.1 blocks based on TMS470, TMS570 microcontrollers with EEPROM chips 95128/95320/95640 installed on Renault, Dacia, Nissan, VAZ vehicles.
The module performs safe and complete repair, restoration, and replacement of data blocks. These ECUs have been installed since 2014 and are still in use today.
The EEPROM reading/writing procedure takes from 7 to 15 seconds, depending on the type of memory chip in the ECU and the adapter used.
Supported functions:
- Identification of ABS/ESP ECU
- Reading/deleting fault codes
- Reading/writing EEPROM
- Reading/writing FULL FLASH (only program and calibration area)
- Reading/changing vehicle VIN code
- ECU reset
- Fully automatic backup creation
Approximate list of vehicles equipped with this ECU:
- Dacia Duster
- Dacia Logan
- Dacia Sandero
- Lada Vesta
- Lada X-Ray
- Nissan Terrano
- Renault Duster
- Renault Logan
- Renault Sandero
- Renault ClioIV
- Renault Captur
- Renault Kaptur
The module has been tested on the following ECUs:
- TMS470+95320 2014
- TMS470+95320 2015
- TMS570+95128 2016
- TMS570+95128 2017
- TMS570+95128 2018
- TMS570+95128 2019
- TMS570+95128 2020
- TMS570+95320 2017
- TMS570+95640 2016
Not all software versions may be supported.
To use the module, you need to purchase a USB protection key. You can activate an unlimited number of modules with one key. To activate new modules, you need to provide the serial number of your key.
Open the program and click “Settings” -> “Number key”
Click “OK” and click ok and your key number will be copied.
After receiving the activation code, click "Enter lecense code" and paste the activation code into the field. After that, restart the program.
1. No Refunds or Modifications for Digital Licenses
Activated modules or licenses cannot be returned or refunded.
If an incorrect key or device number is entered by the customer, the purchase is not eligible for return.
Licenses cannot be modified, transferred, or reissued for another device under any circumstances.
2. Irreversible Order Processing
After the order status changes to “Waiting for activation”, the data has already been sent to the developer.
From this point onward, the order cannot be canceled, edited, corrected, or refunded.
3. Responsibility for Software Functionality
Our store is not responsible for the functionality, performance, or declared features of any software module.
We do not guarantee the listed functions because we are not the developer.
4. Accuracy of Product Information
Module and script descriptions are provided directly by the manufacturer.
IOBD.io is not responsible for any inaccuracies, missing details, or differences between the description and actual operation.
In disputed situations regarding functionality or listed features, the customer must contact the manufacturer.
5. Customer Responsibility for Installation
IOBD.io sells professional automotive diagnostic software and equipment.
Installation, setup, configuration, and compatibility checks must be performed by the customer.
We do not provide remote installation, programming, or setup services unless explicitly stated otherwise.
6. Required Technical Knowledge
These products are intended for users with basic technical knowledge in automotive diagnostics.
The customer is fully responsible for understanding the installation process and using the software and hardware correctly.
7. No Liability for Incorrect Usage
IOBD.IO is not responsible for issues caused by:
incorrect installation
unsupported or incompatible hardware
improper configuration
third-party interference